1975 GMC K25 Ignition Coil Parts

Choose your Engine for your 1975 GMC K25


Showing 1 - 5 of 5 products
Image
SKU
Product
Rating
Price

Accel
  • HEI In-Cap Design; Primary Resist 0.5 Ohms; Secondary 8.6 k Ohms; Turn Ratio 80:1; Max Voltage 45000V; Red And Yellow Primary Wire; Gray;CARB E.O. D-221-6
  • SuperCoil Ignition Coil; HEI In-Cap Design; Primary Resist 0.5 Ohms; Secondary 8.6 k Ohms; Turn Ratio 80:1; Max Voltage 45000V; Red And Yellow Primary Wire; Gray;
  • SuperCoil Ignition Coil
  • Product Attributes:
    • Peak Increase in Voltage: 18%
    • WARNING CA Proposition 65: Yes
    • Turns Ratio: 80:1
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Maximum Voltage: 45000
    • Primary Resistance: .500 Ohms
    • Package Quantity: 1
    • Secondary Resistance: 8.6k Ohms
  • Features:
    • 10-15% More Energy
    • Direct Plug In Replacement Direct OE Fit
    • Advanced Bobbin Technology
    • Highly Specialized Silicone Magnetic Steel Cores
    • Standard Motor Products SMP Dr-31
    • MSD 8225
  • Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.

Additional Fitment Information:
Vehicle Block CC Engine CID
1975 - GMC K25 L - 6 Cyl 4.8L 292

MSD
  • 3.5 mH Inductance; 42000 Max Voltage; 200mA Peak Current; 0.31 ohms Primary/9.2K ohms Secondary Resistance; 200 uS Spark Duration; 70:1 Turns Ratio; Black;CARB E.O. D-40-37 Recommend To Use w/HEAT HEI Module PN[83647]
  • GM HEI Distributor Coil; 3.5 mH Inductance; 42000 Max Voltage; 200mA Peak Current; 0.31 ohms Primary/9.2K ohms Secondary Resistance; 200 uS Spark Duration; 70:1 Turns Ratio; Black;
  • GM HEI Distributor Coil
  • Product Attributes:
    • Spark Duration: 200 Us
    • WARNING CA Proposition 65: Yes
    • Turns Ratio: 70:1
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inductance: 3.5 Mh
    • Maximum Voltage: 42000
    • Peak Current: 200 Ma
    • Primary Resistance: .310 Ohms
    • Secondary Resistance: 9.2k Ohms
  • Features:
    • Direct performance replacement for GM HEI coil-in-cap dist.
    • 70:1 Turns Ratio
    • Lower Primary Resistance Produces High Voltage Output
    • Full Power Sparks To 9000 Rpm w/PN[83647] MSD HEI Module
    • Recommended For Use w/MSD HEI Module PN[83647]
    • CARB E.O. Approved
  • HEI owners now have a choice to replace their stock coil with the MSD High Energy Unitized Coil for GM HEI Distributors. This coil is a direct replacement of the stock coil and offers increased spark energy when used with the MSD HEI Module, PN 83647.The MSD HEI Coil is designed for use with the MSD High Output HEI Module, PN 8364. It will work with stock ignition modules, but for maximum output use the MSD HEI Module.

Additional Fitment Information:
Vehicle Block CC Engine CID
1975 - GMC K25 L - 6 Cyl 4.8L 292

MSD
  • 3.5 mH Inductance; 42000 Max Voltage; 200mA Peak Current; 0.31 ohms Primary/9.2K ohms Secondary Resistance; 200 uS Spark Duration; 70:1 Turns Ratio; Black;CARB E.O. D-40-37 Recommend To Use w/HEAT HEI Module PN[83647]
  • GM HEI Distributor Coil; 3.5 mH Inductance; 42000 Max Voltage; 200mA Peak Current; 0.31 ohms Primary/9.2K ohms Secondary Resistance; 200 uS Spark Duration; 70:1 Turns Ratio; Black;
  • GM HEI Distributor Coil
  • Product Attributes:
    • Spark Duration: 200 Us
    • WARNING CA Proposition 65: Yes
    • Turns Ratio: 70:1
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inductance: 3.5 Mh
    • Maximum Voltage: 42000
    • Peak Current: 200 Ma
    • Primary Resistance: .310 Ohms
    • Secondary Resistance: 9.2k Ohms
  • Features:
    • Direct performance replacement for GM HEI coil-in-cap dist.
    • 70:1 Turns Ratio
    • Lower Primary Resistance Produces High Voltage Output
    • Full Power Sparks To 9000 Rpm w/PN[83647] MSD HEI Module
    • Recommended For Use w/MSD HEI Module PN[83647]
    • CARB E.O. Approved
  • HEI owners now have a choice to replace their stock coil with the MSD High Energy Unitized Coil for GM HEI Distributors. This coil is a direct replacement of the stock coil and offers increased spark energy when used with the MSD HEI Module, PN 83647.The MSD HEI Coil is designed for use with the MSD High Output HEI Module, PN 8364. It will work with stock ignition modules, but for maximum output use the MSD HEI Module.

Additional Fitment Information:
Vehicle Block CC Engine CID
1975 - GMC K25 L - 6 Cyl 4.8L 292

MSD
  • High Performance; w/MSD 6 Series; 8 mH Inductance; 45000 Max Volts; 140mA Peak Current; 350 uS Spark Duration; 100:1 Turns Ratio; Red;CARB E.O. D-40-37 0.7 OHMs Primary Resistance/4.5K OHMs Secondary Resistance
  • Blaster 2 Ignition Coil; High Performance; w/MSD 6 Series; 8 mH Inductance; 45000 Max Volts; 140mA Peak Current; 350 uS Spark Duration; 100:1 Turns Ratio; Red;
  • Blaster 2 Ignition Coil
  • Product Attributes:
    • Spark Duration: 350 Us
    • WARNING CA Proposition 65: Yes
    • Turns Ratio: 100:1
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inductance: 8 Mh
    • Maximum Voltage: 45000
    • Peak Current: 140 Ma
    • Primary Resistance: .700 Ohms
    • Secondary Resistance: 4.5k Ohms
  • Features:
    • Improved output coil for electronic ignitions
    • Works w/Blaster Ignition Or MSD 5/6/7 Series
    • Ballast Resistor Required If Used w/Stock Points Ignition
    • Alkyd tower w/high dielectric properties lessens carbon tracking
    • 100:1 Turns Ratio
    • Lower Primary Resistance Produces High Voltage Output
    • Metal Canister Is Filled w/Premium Grade Oil For Cooling
    • CARB E.O. Approved
    • Available In Red And Black
  • Our famous red canister coil! Great choice with an MSD 6-series ignition. If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD Blaster Ignition, MSD 5, 6, or 7, the Blaster Coil line is the right choice. Our Blaster Coils are designed for improved spark output! Special 100:1 windings are used to provide maximum build-up of voltage! These windings are held secure and kept cool in an oil-filled metal canister. The Blaster Coil is designed to mount in most factory canister coil mounts. MSD also offers a Chrome Coil Bracket, PN 8213. It is recommended to mount the PN 8202, PN 82023, and 8223 coils in an upright position. The High Vibration Coil, PN 8222, can be mounted in any position due to its epoxy potting compound.

Additional Fitment Information:
Vehicle Block CC Engine CID
1975 - GMC K25 L - 6 Cyl 4.1L 250

MSD
  • High Performance; w/MSD 6 Series; 8 mH Inductance; 45000 Max Volts; 140mA Peak Current; 350 uS Spark Duration; 100:1 Turns Ratio; Red;CARB E.O. D-40-37 0.7 OHMs Primary Resistance/4.5K OHMs Secondary Resistance
  • Blaster 2 Ignition Coil; High Performance; w/MSD 6 Series; 8 mH Inductance; 45000 Max Volts; 140mA Peak Current; 350 uS Spark Duration; 100:1 Turns Ratio; Red;
  • Blaster 2 Ignition Coil
  • Product Attributes:
    • Spark Duration: 350 Us
    • WARNING CA Proposition 65: Yes
    • Turns Ratio: 100:1
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inductance: 8 Mh
    • Maximum Voltage: 45000
    • Peak Current: 140 Ma
    • Primary Resistance: .700 Ohms
    • Secondary Resistance: 4.5k Ohms
  • Features:
    • Improved output coil for electronic ignitions
    • Works w/Blaster Ignition Or MSD 5/6/7 Series
    • Ballast Resistor Required If Used w/Stock Points Ignition
    • Alkyd tower w/high dielectric properties lessens carbon tracking
    • 100:1 Turns Ratio
    • Lower Primary Resistance Produces High Voltage Output
    • Metal Canister Is Filled w/Premium Grade Oil For Cooling
    • CARB E.O. Approved
    • Available In Red And Black
  • Our famous red canister coil! Great choice with an MSD 6-series ignition. If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD Blaster Ignition, MSD 5, 6, or 7, the Blaster Coil line is the right choice. Our Blaster Coils are designed for improved spark output! Special 100:1 windings are used to provide maximum build-up of voltage! These windings are held secure and kept cool in an oil-filled metal canister. The Blaster Coil is designed to mount in most factory canister coil mounts. MSD also offers a Chrome Coil Bracket, PN 8213. It is recommended to mount the PN 8202, PN 82023, and 8223 coils in an upright position. The High Vibration Coil, PN 8222, can be mounted in any position due to its epoxy potting compound.

Additional Fitment Information:
Vehicle Block CC Engine CID
1975 - GMC K25 L - 6 Cyl 4.1L 250
Showing 1 - 5 of 5 products

Loading...